Chipset:
VIA PT800 Northbridge / VIA VT8237 Southbridge
System clock: 400/533/800MHz
CPU support
Sockel 478 supports
Intel Pentium 4 and Celeron processors
with 400,533 or 800MHz FSB and Hyper-Threading support
Expansion slots:
1 x AGP (v3.0) slot supports 8X Modus
Important note: AGP-slot supports only 1,5V-mode
4 x 32 Bit PCI (v2.2)
Onboard IDE controller
2-channel enhanced PCI IDE for up to 4 IDE devices
supports UltraDMA/133 (ATA133)
Serial-ATA controller
2-channel Serial-ATA 150 for up to 2 hard discs
supports RAID-mode
Multimedia:
AC97 2.1 stereo sound
Connectors on the backpanel: line-In, line-out, microphone, MIDI/gameport
Further line-ins on the mainboard audio-in for CD-ROM and AUX.
Networking:
10/100MBit LAN
VIA VT6103
Backpanel-connectors:
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Parallel (SSP/EPP/ECP)
1 x Serial
1 x LAN (RJ45)
4 x USB 2.0 (4 more onboard)
Audio: line-in, line-out, microphone
Onboard-connectors:
2 x Serial-ATA150 RAID
1 x Floppy drive (up to 2,88 MB)
4 x USB 2.0 (4 more on the backpanel)
1 x WOL (Wake on Lan)
2 x Audio frontpanel-connectors (microphone and line-out)
2 x CD-ROM audio-in
2 x Fan (CPU, AGP)
Memory:
2 x 184-pin slots
for PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or
PC3200 (DDR400) unbuffered DDR SDRAM memory
with 100, 133, 166 resp. 200MHz clock frequency up to a total capacity of 2GB
When using DDR400, then only one memory module is supported.
Hardware-monitoring
CPU-temperature, system voltage and fan revolution
Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
On/Off-button with two functions: suspend-mode / soft-off
BIOS
AMI BIOS Version
stored in 4MBit LPC Flash-memory chip
ATX-power supply connector
Standard 20-Pin-ATX-power supply connector and additional 4-Pin 12V-connector
Form Factor
ATX: 30.5 x 19 cm

SHUTTLE
VA 49PN